background image

Page 10                    N-Tech Jets F-9F Panther Assembly Guide

The N-Tech F-9F Panther is not a toy. It is a high per-

formance, high speed radio controlled miniature air-

craft and as such requires building and flying skill. 

It is up to the user to assemble and operate the Panther 

in a safe and responsible manner according to the Ra-

dio Control Model guidelines in his or her country. 

N-Tech Jets and their dealers are not responsible for 

the successful or safe use of this product. By using 

this product, the user assumes all responsibility.

For information about the legal and safe operation of 

radio controlled aircraft as well as the related safety 

and legal guidelines for use, please reference the ap-

propriate association:

Australia: Model Aircraft Association of Australia

www.maaa.asn.au

Canada: Model Aeronautics Association of Canada

www.maac.ca

Great Britain: British Model flying Association

www.bmfa.org

United States: Academy of Model Aeronautics

www.modelaircraft.org

Hong Kong, China

Copyright 2011, 

All Rights Reserved

For Service and Information, please contact N-Tech Jets or your local N-Tech Jets Dealer.

[email protected]

For information about the Panther as well as video about its assembly, 

please visit the N-Tech Jets youtube channel

www.youtube.com/ntechjets

Summary of Contents for F9F Panther











Reviews: