N-Com bluetoothk it3, User Instructions

Page: 12 / 32

12
4.3. N-Com Wizard
“N-Com Wizard” is the PC application that can be used to manage and
configure the Bluetooth Kit3 system.
The programme can be downloaded from the Internet site www.n-com.it, in the
“Download” section. In order to use it, a helmet equipped with Bluetooth Kit3 must be
connected to the PC, using the USB cable supplied with the system.
N-Com Wizard allows you to customize your Bluetooth Kit3, specifically:

Setting the system audio levels

Pre-set and manage your favourite radio stations
 Update the device firmware

Turn on or off the Bike-to-Bike menu
 Manage connections with other bikes
The programme includes an on-line guide that explains how it works (after installing it
on your PC, press F1 to display this guide).
Warning: FIRST, insert the jack connector into the helmet. THEN the USB connector
into the PC.
5. PAIRING UP BLUETOOTH DEVICES
In order for the Bluetooth Kit3 system to be connected to another Bluetooth device,
the latter needs to be first paired up with the N-Com system.
The pairing up procedure is the same for all Bluetooth devices: mobile phones, MP3
Bluetooth players, satellite navigators, etc.
1. Make sure the Bluetooth Kit3 is turned off;
2. Press “on” and keep it pressed (for more than 4 seconds), until the LEDs
start to flash quickly and you hear a sharp beep in the headset, indicating
the “Pair-up mode”;