19
11.2.
Intercom function
After carrying out the proper pair up procedure, turn on the two helmets. Intercom
connection will be established automatically (this will take a few seconds. Wait until
you hear the acoustic signal confirming the operation).
If automatic connection is not possible, proceed with the manual connection.
Manual intercom activation With Bluetooth kit3 turned on, briefly press “on”.
Manual intercom
deactivation
With Bluetooth kit3 turned on, briefly press “on”.
12.
BIKE-TO-BIKE INTERCOM
The N-Com Bluetooth kit3 system is used for bike-to-bike communication up to a
distance of about 500 m (open terrain, no obstacles).
N.B.: The range and quality of the communication may very significantly depending
on the presence of obstacles, weather conditions, magnetic fields.
N.B.: The range of the communication varies depending on the N-Com systems used.
The Bluetooth kit3 system stores up to 4 different Bluetooth kit3 systems, so that
“calls” can be made to these devices.
So that two Bluetooth kit3 systems can communicate with one another in the Bike-to-
Bike mode, they must be paired up first.
12.1.
Bike-to-Bike pair up
1.
Make sure both N-Com Bluetooth kit3 systems are turned off;
2.
Set both N-Com Bluetooth kit3 systems in Pairing up mode by pressing “on”
(for more than 4 seconds), until the LEDS start to flash quickly;
3.
On Helmet 1 press the “memory” button where you wish to store Helmet 2;
