B1
9
3.1.
Installing the microphone
JET HELMETS OR FLIP-UP HELMETS
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Prepare the microphone by inserting the
microphone clamp, being careful to position it
properly (Fig. 9)
Note: the flat part of the clamp must be facing
upward when the microphone is positioned as
shown in figure 11.
Position the microphone in its support as
shown in figure 10, being careful that the
fluorescent clamp is facing toward the inside of
the helmet.
Insert screw in the microphone clamp; use the
key to screw in the microphone securing screw
to the shell frame.
FULL-FACE HELMETS
Fig. 13
Fig. 14
Take the polystyrene cheek pad (left-hand side) and position the microphone in its
housing, as shown in fig. 13, making sure that the fluorescent band stays facing the
inside of the helmet. (Fig. 14)
