N-BIOTEK NB-101S Operating Manual Download Page 4

www.n-biotek.com                                                                                                                                                   

N-BIOTEK

 

 

 

 

NB-101S(Ver. 2014)                                                                                                                                                                    4/13 

 

When you move the product, do not lay down to its side or reverse the head to bottom. 

(It can cause the malfunction.) 

 

When you move the product, hold the door and other movable parts of the product with a 

tape.  (When  the  product  is  moved,  the  movable  door  can  cause  injury  of  you  and 

damage of the product.) 

 

When you move the product, you must hold up the product. 

(Pushing or pulling the product can damage the bottom part of the product.) 

 

 

1.3 Precaution for use 

 

 

You must not disassemble, fix and remodel the product by yourself. 

(You  can  damage the  product  throughout  a fire and  malfunction  or get  a  property  loss 

from a different study result than the original purpose.) 

 

Do not use the product for different purpose 

(It can cause malfunction or poor function. Consequently, you will get a wrong result.) 

 

Do not use an inflammable spray near the product. 

(The switch and other electric connection parts can cause a fire.) 

 

When you use inflammable substances such as benzene, thinner, alcohol and LP gas, 

please be careful. (It can cause a fire and an explosion.) 

 

To prevent water and experiment material from going into the control panel during the 

experiment, make sure to clean the control panel with a dry cloth.   

(It can cause an electric leakage and a fire.) 

 

Do not wash the product with excessive quantity of water, thinner, benzene and   

Petroleum. (It can cause an electric leakage, and malfunction or damage on the surface.)   

 

When you don't use the product or clean it, please pull out the power plug. 

(It is to prevent an eclectic leakage.) 

 

 

Summary of Contents for NB-101S














Reviews: