www.n-biotek.com
N-BIOTEK
NB-101S(Ver. 2014) 3/13
Do not bend the power cable hardly and do not make it to be pressed by heavy products.
(When it is damaged, it can cause a fire.)
Do not touch the power code with wet hands.
(It can cause an electric shock.)
Do not use the damaged power code and outlet.
(It can cause an electric shock and a fire.
When you see smoke comes out from the product or smells something is burning or see
any other strange symptoms, you have to pull out the power code and stop using it.
(It can cause an electric shock and a fire.)
1.2
.
Precaution for installation
Use it with the proper voltage.
Please check the voltage & hertz written on serial label.
(Over-voltage, low-voltage can damage the product and poor performance.)
Do not install at a humid place.
(It causes an electric leakage accident and a corrosive of the product.)
Keep this product out of the direct ray of the sun and do not install at a hot place or a
place that is near an electric heat.
(The proper indoor temperature is 20
℃
~ 30
℃
)
Do not put inflammable substances near the product.
(It can cause a fire.)
When you install the product, you have to put the distance of more than 20cm
from the wall.
Install at a flat and solid ground.
(If the ground is not flat, it can cause a vibration of the product.)