Place the drying rack on the left of the kitchen sink
and the worktop to its right.
Move the tap lever towards you to
activate the pump, move the faucet to
the sink and drying rack spraying them
with water. The water will eventually run
underneath the sink cover. (Tip: Repeat
the action if water is not coming out 8
seconds after the lever is pulled, or
replace with new batteries where
necessary.)Move the tap lever towards
you to activate the pump, move the
faucet to the sink and drying rack
spraying them with water. The water
will eventually run underneath the sink
cover. (Tip: Repeat the action if water
is not coming out 8 seconds after the
lever is pulled, or replace with new
batteries where necessary.)
Make sure all the utensils are washed and dried out in the drying rack.
Adjust the tap lever upwards to turn off the power.
Hints: If water stops flowing,
7.1 - Check that the water level does meet the minimum water level (450ML), then
start from point 3.
7.2 - In upright position, shake to empty water residue inside pump, then start from
point 4.
7.3 - Replace with new batteries, then start from point 1.
5
6
7
