Warning! Only adults should insert and replace the batteries.
Locate the battery compartment on the pump component.
Loosen the battery cover with a screwdriver. Insert two “AA”
batteries (alkaline recommended) to the indicated polarity.
Replace the battery cover and tighten all of the screws with
a screwdriver.
When closing the battery cover, ensure that the screw is
tightened securely to avoid water leakage.
Slot the faucet piece all the way into the pump until you hear a locking
sound. Set the power to ‘off’ by moving the tap lever upwards.
Pour water into the sink up to meet
at least the minimum water level
450ML. Secure the sink cover on
the top.
Insert the faucet and pump into the sink, push in
until you hear a locking sound.
1
LR6 ’SIZE"AA" 1.5V x 2
2
3
450ML
450ML
4
EN
