6
Aution: Protection Functions
1.
Over charged protection
2.
Current protection
3.
Shortage protection( fuse installation)
4.
Battery reverse current protection
5.
Built-in ID recognition feature protection
6.
Temperature protection
(1)
When the battery temperature is between 0-10
℃
, the charger will use low current to
pre-charge the battery until the battery temperature higher then 10
℃
, then the charger switch back to
normal charging mode. When the battery temperature is below 0
℃
, the charger will stop charging
the battery until the battery temperature is higher then 0
℃
.
(2)
When the battery temperature is above 45
℃
, the charger will automatically change to low
current to charge the battery. When the battery temperature is exceed 50
℃
, the charger will stop
charging the battery and make warring beep sound until the battery temperature drop down back to
40
℃
, then the charger switches back to normal charging mode.
(3)When the charger temperature rises to 75
℃
, the charger will trigger protection mechanism to stop
charging the battery and until the charger temperature drop down back to 65
℃
, then the charger
switches back to normal charging mode.
7.When the charger detects the battery temperature is lower 0
℃
or about 50
℃
, then the charging process
will be stopped. Automatically rechargeable
8.Low power protection: when the battery voltage is lower than 15V, the charger will automatically
change to low current to pre-charge the battery and until the battery voltage is reach to 15V, then the
charger switches back to fast charging mode.
Specifications
Model type
Automatic Cordless Screwdriver Battery Charge Station
MYCS-ID120
Charge Station
Input voltage (AC)
100V – 240V/0.5A~1.2A
Output
voltage(DC)
21VDC
Output current
4.5A
3.0A
Charge time
(SKC-LB1840)
About 35 min charge to 80% and 45
min to fully charged
(SKC-LB1820)
About 25 min charge to 80% and 30 min
to fully charged
Battery capacity
(3900 mA/hr)
(1950mA/hr)
Battery type
Lithium-ion rechargeable battery
Battery ID
configuration
Battery capacity indicator to show the battery current capacity
Battery ID identifier to match the Kilews’ battery before charging.
size
W × L × H 160mm×170mm×80mm
Weight
1.1Kg
Caution
SAVE THESE INSTRUCTIONS
DO NOT DESTROY
