8
(6) Driver Hook
convenient production lines able to Hook Hanging device balancers work together with the tools
to be more efficiently.
(7) S Waist hook
The S waist hook allows users to carry the device easily by attaching it to their work belt.
(8) Functional light and the status indicator
Whenever the remaining power in the rechargeable battery is fewer than 20%, the tool is still
alive but with red flash lights on. Once the remaining power is towards 10% or even fewer it
may result in poor performance with the continuing red lights on.
Functional indicator
Determine the beep sound
OK screwing with preset
torque
NG screwing
Indicator light
Green on~ off
Red on~ off
Beep sound warning
1 short beep
1 long beep
Indicator of low battery
Power reserve <20%(17.5V)
Power reserve < 10%(17V)
Indicator light
Blinking Red
Red light on ( low power )
Beep sound warning
Continuing Beeping
2 short 1 long beep
Screwdriver functioning
Able to function
Unable to function
(9) Torque adjustable
The torque is able to be changed by following steps
1) Remove the battery from the device or set the rotation switch to
neutral position to prevent the tool from starting up unintentionally.
2) Open up the torque safety cover cap; follow the illustration on the
right which inserting the torque wrench from the bit sleeve to turn
the nut over in a central position, the user may check the nut lock
from side uncovered window.
3) Having the torque changed by inserting the torque wrench into
the nut lock to adjust the torque range.
4) Adjusting the torque in two directions (-) for less torque (+) for
more torque.
Torque adjustment
ring to the + direction
torque increase
Diagram 2
Diagram 1
