Page 21 of 46
ELECTRIC
SCREWDIVERS
Data Analysis: the number of times, the number of shut off, OK and
OKALL interval time can be set. The data which meet the conditions will
be shown.
NOTE:
Data Analysis will be activated when the TQC Range is enable.
g
⚫
Count: the number of shutoff Thread greater than its setting and also the
torque value is greater than 0.
⚫
Scale: 0~8 scale.
⚫
Shutoff Thread: Output shaft must rotate more than displayed value or
result will be ignored.
⚫
Point: Clutch scale (1~15).
⚫
OK Time Limit: Set the maximum duration between each OK1 signal. Once
the time over this setting, it will count 1.
Count: the number of times greater than OK interval.
⚫
OKALL Time Limit: Set the maximum duration between each OKALL signal.
Once the time over this setting, it will count 1.
Count: the number of times greater than OKALL interval.
C
1
2
1
2