Product Manual - Treadmill
170914105200
7
7
Storage
Maintenance
NOTE:
Safety of the equipment can be maintained only if the equipment is examined regularly for
damage or wear. Keep the equipment out of use until defective parts are repaired or replaced. Pay
special attention to parts that are subject to wear, as outlined below.
The following preventive maintenance tips will keep the Treadmill operating at peak performance:
-
Clean the display console and all exterior surfaces regularly with mild soap and water or a mild
household cleaner. Use only a soft cotton cloth. Apply cleaner to the cotton cloth and before cleaning.
-
DO NOT
use ammonia or acid based cleaners.
DO NOT
use abrasive cleaners.
-
DO NOT
use paper towels,
DO NOT
apply cleaners directly to equipment surfaces.
-
Check operation of the emergency stop system once a week.
-
Check the operation of the stop button once a week.
-
Inspect and vacuum the area directly surrounding and under the unit regularly.
-
Vacuum around the running belt regularly to keep debris from accumulating.
-
Inspect exterior parts regularly for wear, particularly the running belt, deck and line cord.
-
Check to make sure the unit is properly levelled.
-
Check the position (centring) of the running belt.
NOTE:
When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are strongly
recommended. At no time should cleaner be applied directly to any part of the equipment; use non-
abrasive cleaner on a soft cloth and then wipe the unit.
