Product Manual - Treadmill
170914105200
4
4
Assembly
1.
Unfold the treadmill and place the
arms into an upright position.
2.
Connect the handle as shown
above lining up the 2 bolt holes on
each side, insert and secure all 4
Alan key bolts provided hand tight
plus half a turn.
3.
Connect the computer control panel to the motor
by plugging it into the port just under the handle
bar.
4.
Before use; move the locking nut (A) into its
storage bracket on the bottom of the treadmill as
shown. Replace the locking nut when storing or
moving the treadmill.
5.
Always make sure the storage PIN (B) is in
place when folding the treadmill.
