2. Setting up your system.
3
This diagram shows how to set-up your system. This is the basic setup for a digital workstation and two
DAT machines. If you don't use a computer please refer to chapter 6. If you want to use external sync
please refer to chapter 7. Digital in/outs can also be used for any other digital device such as CD player,
CD recorder, digital multitrack, digital console, sampler etc.
ANY COMPUTER DIGITAL AUDIO CARD
WITH DIGITAL I/O SUCH AS:
Sonic Solutions SSP, USP,
Sadie, Protools, Digital Audio Labs,
Audiomedia, Adb, Zefiro, Wavecenter
Sonorus, Prodif, TripleDat,
or any other card w/ digital I/O
FROM
ANALOG SOURCE
(pin 2 hot)
TO
ANALOG MONITOR
(pin 2 hot. Lift pin 3
for unbalanced
operation.)
ANALOG IN LEFT
ANALOG IN RIGHT
ANALOG OUT LEFT
ANALOG OUT RIGHT
WORDCLOCK IN
WORDCLOCK OUT
FROM COMPUTER
AES/EBU
AES/EBU
S/PDIF
OPTICAL
S/PDIF
OPTICAL
EXT. DIG
AES/EBU
TO COMPUTER
1ST DAT MASTER
OR DIGITAL RECORDER
2ND DAT MASTER
OR CD player
S/PDIF
OPTICAL
EXT. DIG. AES/EBU IN
EXT. DIG. AES/EBU OUT
EXT. DIG.
S/PDIF OUT
FUSE
1
Amp
SLO
BLO
EXT. DIG.
S/PDIF IN
AES/EBU
TO COMPUTER
CAUTION!! LINE VOLTAGE INSIDE!
THIS UNIT MAY BE OPENED BY QUALIFIED PERSONNEL ONLY!!
220
110
