4
Mytek USB2 Class2
1. Introduction
The Mytek USB2 CLASS2 Card is an optional card that is installed into the rear expansion slots of
the Mytek 8X192 ADDA converter. With this card installed the Mytek 8X192 ADDA can be directly
connected to a MAC OS, Linux or Windows computer via USB. The card may be installed by the user
as described further in the manual.
All the best,
The Mytek Digital Team
2. Package Content
• The USB2 CLASS2 expansion card
• EEPROM chip for 8x192 mainboard
3. Features
The extension card offers option of connecting 8x192 ADDA via the USB interface and using this
converter as the audio interface for Windows, Linux and Mac OS.
4. Before You Begin
Before connecting the USB2 CLASS2 card please check if the most current firmware (version 6.3 or
later) is installed in the 8X192 converter. To verify the version, locate the firmware chip (8 pin DIP chip
in a socket near the aluminum heat sink) on the main converter board or contact Mytek if you require
assistance.
In the support section of the Mytek website at:
www.mytekdigital.com/download_library
you will find
current detailed information about firmware versions and most current firmware and driver update
instructions. If necessary contact Mytek and request appropriate firmware.
Summary of Contents for USB2 CLASS2
Page 1: ......
