User’s Manual
11
7. Firmware update Windows and OS X
The current revision of the Liberty
DAC firmware is shown in the
MytekControl „General” tab.
•
The firmware can be updated by using USB2 port and Mytek Control Panel application. It requires
already installed USB2 driver (PC only) and Mytek Contro Panel application. To download the
current firmware as well as drivers please visit mytekdigital.com
•
It is recommended to turn off any powered speakers / power amps connected to the Liberty DAC
before proceeding with the firmware update.
Follow the steps below to update the firmware:
1.
Download the latest firmware (*.mfb) file from mytekdigital.com
2.
Click „Load firmware file” button and browse to the new firmware file then click „Open”.
3.
Press the „Update” button to confirm uploading the firmware file to device's memory.
4.
Confirm your choice by clicking „Yes” when warning dialog appears. A progress bar will indicate
when the flash process is finished.
5.
When the update is finished the the DAC will reset and start in sleep mode. To switch it on press
the knob once. Once the DAC has been restarted the firmware update is complete. A reboot of
the computer is not necessary.
When the update fails:
1.
Disconnect power cord.
2.
2. Press and hold the knob and connect the power cord again.
3.
The DAC runs in Bootloader mode. The MQA/DSD becomes white and blinks constantly.
4.
The update process should then be tried again.
Summary of Contents for Liberty DAC
Page 1: ...Owner s Manual DAC HEADPHONE AMPLIFIER...
Page 16: ......
