9
2 - Machine Operation
2.1 - Powering the Prep Center S
To power the Prep Center S, plug the power cord into a ground-
ed 20 amp outlet.
♦
2.2 - Connecting Vacuum and Solution Hoses
Connect the vacuum hose via Cuff-Lynx™ connector to clear
elbow on top of the machine. Simply twist the male Cuff-Lynx™
into the elbow. Connect the solution line to female solution
quick connect fitting on the switch plate.
♦
2.3 - Connecting Shop Air Line
Shop air input is located in the bottom-right corner of the rear
of the machine.
Output is located on the switch plate.
♦
2.4 - Filling the Solution Tank
Faucet Fill
The solution tank can be filled
from a standard faucet or hose
bib. Simply lift the Faucet Fill
hose out of the tank and press
it against the faucet. Turn on
the faucet to allow water to
flow into the tank.
Bucket Fill
Fill up a bucket with water and
pour into the solution tank
through the opening on top
of the machine. Add desired
chemical according to manu-
facturer specifications.
♦
2.5 - Dry Vacuuming
IMPORTANT: DO NOT dry
vacuum without a Pig-
let™ Filter in place on the
strainer basket. This will
cause damage to the vac-
uum motor.
1. Attach a vacuum hose to
the clear elbow.
2. Switch on the vacuum and begin vacuuming.
3. Replace the Piglet™ filter regularly.
♦
2.6 - Hot Water Extraction with the
Prep Center S
To avoid a vapor lock, follow this procedure when turning on the
machine for hot water extraction.
Strainer
basket
Piglet™
Filter
Tank lid
INPUT
OUTPUT
1 2
3
Do not operate machine with a spray nozzle orifice
smaller than #2. This can damage the pump switch.
Do not pull on hoses in order to move the unit. Use
only the appropriate handles.