6
The ECO-17 features a valve that allows you to switch
between using the pump to spray solution or using the
gravity-feed hose. Point the valve knob to the left for grav-
ity feed and to the right to use the spray jets.
Note: Disconnect the power cord from electrical outlet
and empty any solution from the tank before removing or
installing the pad driver. The pad driver is attached with
four bolts (highlighted above). To use a pad, simply lay
the pad on the floor and lower the machine with the pad
driver onto the pad. Try to center the pad as much as
possible.
PAD DRIVER AND PAD INSTALLATION
BI-DIRECTIONAL VALVE
ECO-17 ENCAP MACHINE SETUP & OPERATION
SOLUTION SPRAY LEVER
Squeeze the left or right solution spray levers to activate
the pump and spray solution.
POWER SWITCH
To turn the machine on, lower the handle to the desired
position and then flip the power switch to the “on” posi-
tion.
