Important Information
03
BEFORE YOU BEGIN
SAFETY PRECAUTIONS
Radiators are hot when in use, and as such, present a risk of burns to users on prolonged contact. The temperature of a
radiator is dependent on the temperature of the system water, as set by the system installer or user. Installers and users
should ensure that those who may come into close proximity to hot radiators are aware of the risk of burns. Installers
and users should take all necessary steps to minimise the risks of burns. If the risk is significant, consideration should be
given to installing low surface temperature radiators, or to placing guards in front of the radiators.
For the correct installation of radiators it is essential that the fixing of the radiator is carried out in such a way
that it is suitable for intended use AND predictable misuse. A number of elements need to be taken into
consideration including the fixing method used to secure the radiator to the wall, the type and condition of the wall
itself, and any additional potential forces or weights that may happen to be applied to the radiator, prior to
finalising installation.
IN ALL CASES IT IS STRONGLY RECOMMENDED THAT A SUITABLY QUALIFIED
PROFESSIONAL INSTALLER OR SIMILAR TRADESPERSON CARRIES OUT THE INSTALLATION.
INTRODUCTION
The Myson
Column
Radiator will keep any room in comfort and style. We at Myson Inc. thank you for your purchase of the
Column
Radiator. Each radiator combines Myson’s compact design and advanced steel construction with a durable baked
epoxy/polyester enamel powder coat finish. Myson’s sleek styling and thorough testing provides attractiveness and
dependability. Myson’s goal is to assure the highest performance, quality, reliability and outstanding customer service.
CAUTION
Step 1
Read this entire instruction manual thoroughly before beginning installation.
Step 2
To ensure full efficiency of your Myson Décor Steel Panel Radiator, please follow all
the instructions carefully .
Step 3
Failure to follow these instructions will invalidate the manufacturer’s warranty.
APPLICATION
Myson radiators are only for use in recirculating closed loop hydronic-heating systems. These radiators are not recom
-
mended
for gravity systems.
DO NOT USE STEAM IN THESE RADIATORS.
INSPECT FOR DAMAGE
NOTE:
Inspect materials for concealed shipping damage. You only have 10 days to file a freight claim. If items are
damaged or missing, please call Myson at 1-800-698-9690.
INSPECTION FOR COMPLETENESS
Unpack the radiator carefully to avoid damage or loss of parts.
The
Column
R
adiator will come with the following parts:
• Wall
mounting
bracket
kit
• Plastic inserts for noise suppression
• Stainless steel solid plug
• Vent plug
IT IS STRONGLY RECOMMENDED THAT A SUITABLY QUALIFIED PROFESSIONAL
INSTALLER OR SIMILAR TRADESPERSON CARRIES OUT THE INSTALLATION.
Myson products are designed to be installed by professional tradespeople. Myson instructions are meant to be thorough;
however it is assumed that the installer has the appropriate technical knowledge related to building codes, standard trade
practices, and proper use of the tools of the trade. Should a homeowner without such knowledge or skill take it upon him/
herself to attempt the installation, Myson will not be responsible for any damages, injuries or unsatisfactory performance of the
Myson product used.
DESIGN AND LAYOUT CONDITIONS
Myson
Column
Radiators should only be used with a
properly sized
recirculation pump
closed loop hydronic heating system
.
Please consult national and local codes for specific restrictions that may be imposed on your installation. Position your radiator
away from your
circulator pump to avoid either excess pressure that could force water out the air vent or excess suction that
could draw air into the system. The preferred positioning for the
Column
radiator is below a window where it can minimize
downdrafts from glazed areas.
Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com
