page 8
6.3 Two channel, switching and dimming
Switches the relay channels with occupancy and provides dimming control for DSI/DALI enabled
luminaires. An optional switch allows the outputs to be turned on and off and dimmed up and down.
Note that in this configuration the dimming luminaires can have a permanent live feed, with digital
switching via DSI/DALI. In this case, it is recommended that the relays are disabled using the jumpers.
6.2 Single channel, switching with external lux sensor
Switches the relay channels with occupancy and external lux sensor. An optional override switch allows
the output to be turned on and off manually. No dimming output. In this configuration the internal lux
sensor needs to be disabled by setting ―Switch level on‖ and ―Switch level off‖ to maximum.
This configuration is used when a separate lux sensor is needed to control multiple detectors. For example
in a warehouse, a lux sensor measures the ambient light for an area and disables the output for a number
of aisles.
www.cpelectronics.co.uk
MWS7
Microwave Aisle Sensor
ISOLATED SWITCH
INPUTS ONLY!
230VAC 10A
EXTERNAL
LUX SENSOR
G
N
D
E
X
T.
L
U
X
G
N
D
S
W
.U
P
S
W
.D
O
W
N
JUMPERS
LIVE
NEUTRAL
EARTH
LUMINAIRE
(NON-DIMMING)
N
E
U
T
R
A
L
L
/O
U
T
OVERRIDE SWITCH
(CENTRE-BIASED RETRACTIVE)
www.cpelectronics.co.uk
MWS7
Microwave Aisle Sensor
ISOLATED SWITCH
INPUTS ONLY!
230VAC 10A
DIMMING
BALLAST
G
N
D
S
W
.U
P
S
W
.D
O
W
N
DSI/DALI
(+)
DSI/DALI
(-)
JUMPERS
LIVE
NEUTRAL
NEUTRAL
LIVE
EARTH
LUMINAIRE
(NON-DIMMING)
LUMINAIRE
(DSI/DALI DIMMING)
N
E
U
T
R
A
L
L
/O
U
T
OVERRIDE SWITCH
(CENTRE-BIASED RETRACTIVE)
