7
PLAYING MP3 DISCS
The MXC7000 plays MP3 music discs in very much the same way
as CDs but there are a few differences, described below. It is
recommended that all discs should be finalised before playing, or
they may take an excessive time to load.
STOP mode
When the disc is first loaded the display will briefly read
“DATA DISC”, followed by the MP3 TOC display which takes the
form “163 F12” – meaning the disc has a total of 163 tracks
spread across 12 separate folders.
PLAY mode
When PLAY is pressed the disc will start playing at track 1 of
folder 1. Skip, Scan and Pause commands operate normally. A
typical display is shown in Figure 6 – with track 11 of folder 5
currently playing.
MP3 play mode display
(Figure 6)
Folder skip
To skip to the next folder or previous folder, press the left or right
navigation keys:
or
on either side of the “SEL” key on the
remote. When one of these keys is pressed the player will go to
the next folder or the previous folder respectively and start playing
the first track of that folder.
Track number keys
When playing an MP3 disc the track number keys select the track
number within the current folder. If the player is in Stop mode, or if
a track number is entered with the drawer open, the track will be
chosen within folder 1.
If a track number is entered which is not present in the relevant
folder, the entry will be ignored. The maximum track number
which can be entered is 999.
TIME
With MP3 discs the TIME key operates in a similar way as with
CDs in Stop mode.
In Play mode the TIME key will step between Track Title, Artist
Name, Album Title (if present on the disc) and track elapsed time
displays. There are no “remaining time” displays available with
MP3s. This operation is summarised in the table below.
TIME key operation in play mode with MP3 discs
No. of “TIME” presses
Display
Normal operation (0)
Track number & elapsed track time for
5s, followed by track title, followed by
track number and time once more.
1
Track title, scrolled if necessary and
re-scrolled every 40s.
2
Track number & elapsed track time
3
Artist’s name, scrolled if necessary
4
Album title, scrolled if necessary
5
Return to “normal operation”.
SHUFFLE
Shuffle mode works with MP3 discs in the same way as it does
with CDs, but with two shuffle options – SHUFFLE FOLDER and
SHUFFLE ALL. There is no track calendar available with MP3
discs.
REPEAT
The repeat command works in a similar way as with CDs, but
there is the addition of the “Repeat Folder” option.
The first press of REPEAT sets Repeat 1 mode, displays
“REPEAT ONE” briefly and lights the REPEAT 1 icon. The
second press sets Repeat Folder mode, displays “REPEAT FOL”
briefly and lights the REPEAT icon. The third press sets Repeat
All mode, displays “REPEAT ALL” briefly and the REPEAT icon
remains alight. Finally, a fourth press will cancel repeat mode and
“CANCEL” will be displayed briefly.
Repeat All and Shuffle All modes may be used together if desired
and may be selected in either order.
REPEAT A-B
Repeat A-B is not available with MP3 discs.
DIM
The track calendar is not available with MP3 discs. The DIM key
therefore only switches between Display On and Display Off
modes.
PROGRAM
The PROGRAM function is not available with MP3 discs.
Summary of Contents for MXC7000
Page 1: ...MXC7000 Remote Controlled Compact Disc Player Owner s Manual...
Page 10: ...10...
Page 11: ...11...