11
www.pitmasterQ3.com | 1-877-575-3173 Myron Mixon Pitmaster Q3
Parts required:
Grill (1)
Hardware required:
4 x Nuts 1/4” (36)
4 x Flat washers 1/4” (38)
4 x Spring washers 1/4” (39)
4 x Bolts 1/4” (40)
Tools required:
Open end wrench (42)
Take the porcelain grill (16) and grease drain pan (17)
out of the grill (1), if you haven’t already done so.
Place the grill on the legs.
Note: The two wheel legs should be at the same side as the paddle vent (15).
After aligning the holes in the grill and the legs, insert a 1/4” bolt (40) through each leg tube, then through the grill.
Put a 1/4” flat washer (38) and a 1/4” spring washer (39) on each bolt inside the grill, then put on a 1/4” nut (36)
and tighten it.
STEP 5
Mount the Legs on the Grill
STEP 8
Position the Heat Baffle, Grease Pan, Water Pan and Grates.
ASSEMBLY INSTRUCTIONS
Paddle
vent
Washers
Nut
Grill
Bolt
Hardware required:
4 x Screws 1/4” (34)
Align the four holes in the side shelf bracket (2/3) with
the holes in the grill (1).
Put a 1/4” screw (34) through each hole and tighten it.
STEP 7
Attach the Side Shelf Assembly to the Grill
Screw
Door handle
Door
Screw
Washers
Hardware required:
4 x Screws 1/4” (34)
Align the four holes in the side shelf bracket (2/3) with the holes in the grill (1).
Put a 1/4” screw (34) through each hole and tighten it.
STEP 6
Attach the Lid
