Myria MY2613, User Manual

Page: 17 / 20

EN MY2613 - User manual
17
1 External power supply 12V port.
Intended to provide external power 12V.
NOTE: Pay special attention to polarization!
2 Power outlet through charger.
Intended to connect a charger.
NOTE: Use the feeder cable attached only.
3 Battery charging LED
The LED signals battery charging (red color when charging, green
when full).
4 Microphone input
Intended to connect a wired microphone with a plug jack 6,3mm.
5 On/off switch.
Set I to switch the device on. To switch it off, set O.
6 Colored LED on switch.
The switch activates colored LEDs in front of the device.
7 Change source button
Press to change the source of sound:
LINE – line input (AUX)
BLUE – Bluetooth
FM – FM radio
USB – USB carrier
SD – SD card
Hold the button to deactivate voice messages.
8 Record button
Hold for a few seconds to activate microphone recording mode. Press
again to finish. The recording will be played automatically. To play a
recording again, quick-press the button.
To record, USB carrier or SD card is required.
9 Repeat mode button
It sets repeating modes:
ONE – repeats one track
ALL – repeats all tracks
Hold the button to activate microphone priority: in this mode music is
muted when you use the microphone.
10 Previous” key (PREV)
USB, Bluetooth, SD mode: press to play a previous track.
FM mode: after you have searched and saved radio stations, quick-
-press to switch on previous station. Hold longer to find another
station.