EN
13
MY2238, MY2239, MY2240, MY2241 - User manual
top view
side view
unit (m)
COVERAGE ANGLES
Fig. 4
(1) Switch off the power source.
(2) Remove the mounting bracket from the Led floodlight.
Drill the wall and screw the bracket onto the wall using suitable plastic wall plugs and
screws. Check that the bracket is securely fitted on the wall.
Note: Do not at this stage re-attach the floodlight to the bracket.
(3) Connect the power cords.
• green-yellow - grounding
• red - L
• green - N
(4) Re-attach the floodlight to the bracket and secure the cable to the wall using suitable
clips. Ensure that the cable is not touching the body of the floodlight, and that there is
sufficient slack in the cable to allow the floodlight to be tilted and adjusted as required,
which should be done by grasping the metal body of the floodli- ght, not its rear wiring
box (fig. 5).
Fig. 5
