EN
10
MY2238, MY2239, MY2240, MY2241 - User manual
1) Floodlight body
2) Front Surround
3) PIR (Motion Sensor) - only for sensor models
4) Wiring Box
5) Mounting Bracket
6) Fixing Screw & Plastic Wall Plug (Not supplied)
INTRODUCTION
LED FLOODLIGHT IP65, 10W, 30W is designed for normal use of outdoor or indoor use,
which can be used in gardens, park, lawns.
Please note to connect fixtures, cable H05RN-F 3x0.75mm
2
is applied. The fixtures
require power supply as is mentioned on product label. The power should accord to the
loading properly. The light is LED source inside the fixtures.
Application: decorative lighting at gardens, parks, lawns.
Note: Read this entire manual before you start to install the system.
SAFETY PRECAUTIONS
• Do not install when it is raining.
• Be sure to switch off power source before installing.
• Make sure that the power wiring comes from circuit with a suit- able fuse or circuit
breaker.
• Keep minimum 1m away from the lighted objects for 10W, 30W LED floodlight.
• Keep minimum 30cm away from the ceiling and wall. (fig. 1)
