Myria MG7401, User Manual

Page: 13 / 16

4
MG7401 - User manual
GB
2. Start Control Panel Game Controller
3. Connect the wheel to your PC install the driver by the instructions on your PC
Your PC will automatically run driver“LS-USBMX1/2/3 steering…”
5.1.3. Testing
Enter test page
1. Test of steering
To steer the wheel, the corresponding block X axis would shift simultaneously; if the “+”
cursor is not at the center position of the block X/Y axis, please enter into Calibration
test.
2. Test of 1 ~ 12 button
Press the buttons of the Racing wheel respectively from 1 to 12, the corresponding
numeral button on
The PC interface “Function Test” will become red illuminating.
3. Test of D-pad
Press the 8 directions of D-pad (up, down, left, right plus 4x45 degree angle), which
correspond to the eight directions of X/Y axis of the Pov info” block;
4. Calibration Test: (Analog Mode – Mode LED illuminate RED)
Enter calibration page. It is applicable to the “+” cursor away from the center. When
the “+” cursor of the Racing wheel is not at the center position of the block “X/Y” axis,
press “Default” first and then “set” subsequently;
5. Effect page Test
Enter Vibration Interface to test the function of axis and pedals (left wing and right wing)
To steer the wheel, the left motor vibrate corresponding. When program the pedal or
L-wing and R-wing as RY axis, the right motor vibrates when pressing.
5.1.4 Driver Uninstall
Rerun the driver. Click “NO” to remove the driver. Click “YES” to reinstall the driver.
Trouble shooting
• The wheel is not working when software and hardware installation is completed in PC
Please check whether the wheel cable is properly connected to your PC. If the problem
still exists, please restart your PC
• The motors do not vibrate in racing games (e.g. Need for Speed 5).
Quit the game and restart it. Do not insert or pull the wheel cable when gaming.
Please check if the driver is installed.
Please check if you have change the MODE during playing the game.
If the problem still exists, please restart your PC.
• Right motor keeps vibrating when the game starts
Enter Force Feedback. Turn down Engine or turn it off
Engine
• Motor vibration is weak when the game starts
Enter Force Feedback. Select a higher level for “STICK VOLUME” and “ROAD
EFFECT”.
Or enter Vibration Test Page and select a higher level vibration