5
MG7400 - User manual
GB
5.4. For use with PC
5.4.1. X-INPUT
1. As default mode when power on, red LED and 1st channel indicator light.
2. Press and hold HOME for 3sec. to switch to D-input, both above LED off, red LED
light again after 0.5sec
5.4.2. D-input installation
1. Start Windows and put the CD into CD-ROM. Double click SETUP and follow on-
screen instructions to complete the driver installation.
2. Connect the wheel to your PC Start Control Panel Device and Printer
right click the device and printer Game controller Properties.
5.4.3. Test
1. Enter Test interface to test buttons and axis functions
2. Enter Calibration interface to calibrate the axis
3. Enter Vibration interface to test axis and pedals
5.4.4 Driver Uninstall
1. Start Control Panel programs/Function
2. Find the driver you want to remove in the Interface” current installed programs”. Click
“Remove” and follow the instructions to get successful uninstall.
6. Trouble Shooting
1. If the connection LED is not on, please connect to the controller again and check and
controller is working.
2. If the racing wheel do not have an reaction, and the console is stuck, please power
off the console and power on again
3. Please re-connect the racing wheel after incorrect operation during the game
4. Please power off the original controller before connect the racing wheel to PS4 or
XBOX One console.
7. Precautions
1. Please read through and familiarize the manual before using this racing wheel
2. Do not hit, drop or abuse it
3. Do not disassemble, modify or try to repair by yourself
4. Do not store it in place that is moist, hot or greasy
Note (1) before move the wheel, please loosen the sction cup to prevent damage of
your wheel or table, see demo:
Small plastic handle
should be raised in
order to loosen the
suction cup
