3
MG7400 - User manual
GB
4. Function Introduction
4.1 Program Functions
4.1.1 Introduction
1. Program source button: //1/X,
/3/B, /4/Y,X/2/A,L1/5/LB,L2/7/LT,R1/6/RB, R2/8/
RT
2. Programmable button: L-wing ( /1/LT), R-wing (X/2/RT), Foot Accelerator (X/2/RT),
Foot Brake ( /1/LT), L3/11/SL, R3/12/SR, Gear-shift (L2/7/LB, R2/8/RB).
4.1.2 Program setup
1. Press PROG or SHARE/9/View + OPTIONS/10/Menu, Hold for 3 seconds until the
green LED is on.
2. Press the programmable button, and the green LED starts blinking
3. Press program source button. The green LED is off. Program is set.
4.1.3 Clear single program
1. Press PROG or SHARE/9/View + OPTIONS/10/Menu, Hold for 3 seconds until the
green LED is on 2. Press programmed button and the green LED starts blinking
3. Press programmed button again and the green LED is off. Single programmed button
is cleared
4.1.4 Clear all programs
1. Press PROG or SHARE/9/View +OPTIONS/10/Menu, Hold for 3 seconds until the
green LED is on
2. Press OPTIONS/10/Menu and hold for 4 seconds. The green LED is off. All of the
programmed buttons are cleared. Default is restored
4.1.5 Program Pedals as Y axis
1. Press PROG or SHARE/9/View + Option/10/Menu. Hold for 3 seconds until the green
LED is on.
2. Press LEFT of the D-PAD. The green LED is off. Pedals are programmed as Y
function
4.1.6 Program L-Wing and R-Wing as Y axis
1. Press PROG or SHARE/9/View + Option/10/Menu. Hold for 3 seconds until the green
LED is on
2. Press RIGHT of the D-PAD. The green LED is off. Pedals are programmed as Y
function.
4.1.7 Clearance the L/R-wing or Pedal as Y axis
1. Press PROG or SHARE/9/View +OPTIONS/10/Menu for 3s Green LED On
2. Press the L/R-wing or pedal which fixed as Y axis, Green LED blinking
3. Press the L/R-wing or pedal which fixed as Y axis, Green LED off to clear
Note: All of the settings will cleared when the wheel is power off
