Step 2: Set up your nbn™ FTTC connection
device
• Take out the nbn™ FTTC connection device, power cord and telephone
cable.
• Read the Warning Sticker on the side of the nbn™ connection device and
remove it. This will now provide you access to the nbn™ connection ports.
• Check that the LED indicator light panel on the top of the nbn™ connection
device is visible.
• Connect one end of the power cable into the power port on the nbn™
connection device and the other end into a power outlet. Turn on the power at
the power outlet to turn on the nbn™ connection device.
• Connect one end of the telephone cable into the wall socket port on the nbn™
connection device and the other end into the first telephone wall socket in
your home.
• Take an ethernet cable that was supplied with your modem and plug one end
into the yellow gateway port of the nbn™ connection device and the other
end into the red WAN port of your modem.
• It can take up to 15 minutes to successfully connected to the nbn™ network,
once connected the DSL and connection light on the nbn™ connection box
will turn solid blue.
nbn™ Equipment
Telephone
Wall Socket
Ethernet Cable
Telephone
Cable
6
7
