Chapter Installation
This chapter describes:
l
Additional components for building a complete
system.
l
How to install components onto the system
boards.
l
How to install the system board into a com-
puter chassis.
Building a complete system
You will need the following components to build
a complete system using the MAE486 or
MBE486 system board:
A standard chassis. The MAE486 and
MBE486 system boards are 13.8 inches long
by 12 inches wide. This size allows the system
boards to fit into an AT-compatible chassis.
Good-quality 250 Watt power supply capable
of providing at least 5 Volts continuously.
An 8 Ohm speaker to provide sound.
Hard disk drive.
One floppy drive
or
Combination of hard disk drive and floppy
drive controller card.
Installation and Operation Guide
4-t
