Mylek MYC01-10A, Instruction Manual

Page: 3 / 15

www.mylek.co.uk
3 | Page
materials within easy reach of children. Before switching on
appliance check if the electrical voltage and frequency of the
circuit correspond to those indicated on the appliance. Use the
appliance only for the stated purpose, namely as a heater for
domestic use. Do not use it for any other application as it could be
dangerous.
Safety Instructions:
•
The product is for indoor use only.
•
The item should be used only as intended.
•
Check item carefully before use. Do not switch on heater with
defects or damaged power cable.
•
The appliance should be connected to the same voltage as
shown on the rating label and printed in the manual.
•
The heater should only be plugged into grounded sockets.
•
Before plugging in the heater, make sure it is switched off.
•
Do not use the appliance near flammable liquids or any
flammable materials.
•
The appliance must not be located immediately below a socket
outlet.
•
If the power cable is damaged in any way, send it to the nearest
after sales service recommended by the manufacturer for
replacement.
•
Do not connect the appliance to extension cables or multiple
outlets.
•
Do not damage or knot the power cable.
•
Before cleaning the appliance or carrying out any maintenance
switch off the heater, unplug from its power source and leave
to cool for 1 hour.