www.hsdonline.co.uk
9
FAULT-FINDING
The heater has an overheat protection switch, which disconnects the power if the element
gets too hot. The usual reason for this is because the air-flow has been obstructed. If the
heater ceases to operate, leave it for 20 minutes to cool down, then check that the grilles are
not being obstructed. Switch back on, and check that the unit is operating normally. If not,
contact an authorised service agent for repair.
The importer retains his right to make changes in appearance and completeness of the item
without preliminary notification to the customer.
The item is for indoor use only.
The manufacturer does not assume any liability for any damage caused directly or indirectly by
not following this instruction manual, general safety rules, or interference in the construction of
the product.