RC4 decoder V2.0. - October 2017
© MYLAPS rights reserved
2
Published by:
MYLAPS B.V.
Zuiderhoutlaan 4
2012 PJ Haarlem
The Netherlands
Copyright © 2017 No part of this document may be reproduced by any means without the written consent of the publisher.
Whilst every care has been taken to ensure that the information in this document is correct, no liability can be accepted by
MYLAPS for loss, damage or injury caused by any errors or omissions in this document. The sale of products, services of
publication is provided solely for informational purposes.
All hardware and software product names used in this document are likely to be registered trademarks and must be treated
accordingly.
Manual revision history
Version
Date
Amendments
Version 2.0
October 2017
Settings update for drone (DR5) use.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or
installed at locations where there is at least 20 cm separation distance between the antenna and all persons.
This device complies with the EMC directive 2004/108/EC and RTTE directive 1999/5/EC. A copy of the declaration of
conformity can be obtained at:
MYLAPS B.V.
Zuiderhoutlaan 4
2012 PJ Haarlem
The Netherlands
RoHS Compliant
This equipment has been tested and found to comply with the limits for RoHS compliant materials. These limits require
manufacturers to ensure that they do not use materials or components that contain restricted substances that may be
harmful to the environment.
