Step 1.
Firmly insert the
myglucohealth
TM
test strip into
myglucohealth
TM
Meter test port. Insert the
strip with the
myglucohealth
TM
logo up firmly. Please do not insert the test strip
upside down. When you insert the test strip into the meter, the power automati-
cally turns on with the code and temperature. After 3 seconds, the code number
and testing temperature will disappear.
Note :
Inserting the test strip in the wrong direction will turn the meter in but the
test will not be done.
< Caution >
1. If you did not confirm the code in 3 seconds, pull the test strip out of the port and
re-start the procedure from the beginning.
2. If the code on the LCD display window and on the test vial does not match, try
anotther new strip. If the mismatch persists, please contact your local representative
for help.
3. If the meter does not power on, pull the test strip out of the port, and reinsert the test
strip.
4. Avoid testing under direct sunlight, for a more accurate test result.
5. If you apply your blood sample too early, error message will appear on LCD
(refer to p35)
Testing Your Blood
Before testing, be sure to read carefully this section and test strip instruction for
use found in the test strip box carefully. Make sure you have all the necessary
items to begin your test
1.
myglucohealth
TM
Meter
2.
myglucohealth
TM
Test Strip
3. Lancing device
4. Sterile lancets
< Caution >
The Lancing Device and Sterile Lancets should NOT be shared with others to
reduce the chance of infection. It is only for your own personal use.
1. Always use a new, sterile lancet. Lancets are for single use only
2. Avoid getting hand lotion, oils, dirt, or debris in on the lancets and the
lancing device.
Testing Your Blood
20
myglucohealth
TM
Blood Glucose Monitoring System
Practice using the lancing device and become accustomed with its use. Wash
your hands with warm, clean water and soap. Dry your hands completely
before testing.
myglucohealth
TM
Blood Glucose Monitoring System 21