b)
If when airplane is Turing and heading to home. But the fly track
is like snake walking, it means the
CRUISE-P
is too high go to the
OSD menu
AUTO-PILOT SETTINGS->CRUISE-P, bring down the
number by 1 every times.
c)
If the airplane speed is too fast or too low, you can set the
parameter to a desire value
AUTO-PILOT SETTINGS-> MIN SPEED
AUTO-PILOT SETTINGS-> MIN THROTTLE
By following the steps, the airplane should be flown to home. For more
precise setting, please refer to
《
9.OSD menu system
》
OSD menu system
1. AUTO-PILOT SETTINGS –auto fly parameters.
1.1 *MAX-ROLL --
maximum roll angle
，
default is 45 degree. When in
the STB mode, the maximum angle you can bank. Increase this number
will increase the control respond from the airplane, but too much will
cause unstable flying. Recommended range are 10 ~70 degree.
1.2 *MAX PITCH-UP --
maximum pitch up angle, default is 30 degree.
When in the STB mode, the maximum angle you can pitch up. Increase
this number will increase the control respond from the airplane, but too
much will cause unstable flying. Recommended range are 5 ~45 degree.
。
1.3 *MAX PITCH-DOWN
maximum pitch up angle, default is 20
degree. When in the STB mode, the maximum angle you can pitch down.
