How to enter the OSD menu
THR, CH5 and CH6 in LOW, move ELE to the bottom-right corner, wait for 2 seconds or longer
until the OSD prompts “Enter menu?”. Then switch the CH5 to HIGH to enter OSD menu mode.
How to exit the OSD menu
THR in LOW, switch CH5 to LOW to exit the OSD menu.
How to access the menu
Use ELE to move the indicator UP and DOWN.
Moving ELE to RIGHT to edit the item value or to enter the next level sub-menu.
Moving ELE to LEFT to quit editing an item or to go back to the upper level menu.
When editing values, switch CH6 to LOW/MID/HIGH position to select 1/5/10 step length.
During the initial installation of the Autopilot on the aircraft
follow the procedure:
Initial setup
Please follow this procedure to setup the AP:
1)
Enter OSD menu
SAVE/LOAD->LOAD PRE-SET
and select a model which is similar with your
plane. Move ELE to the right to load in the model settings. In current version the pre-set
models includes:
模型名称
备注
Crosswind
(
Default
)
Nimbus
