Installation Manual for F36 and F54 Ceiling Fans
6
FiNiSHiNg THE FAN iNSTALLATiON
1. Align the locking slots of the ceiling canopy with the two screws in the mounting plate. Push up to engage
the slots and turn clockwise to lock in place. Immediately tighten the two mounting screws firmly. Install the
remaining two mounting screws into the holes in the canopy and tighten.
Figure
10
Canopy Ring
Ceiling Canopy
Hanger
Bracket
Downrod/Hanger Ball Assembly
MAkiNg THE ELECTRiCAL CONNECTiONS
1. Connect the fan supply wire and light supply wire (Brown wire and Orange wire) to the household supply
Active wire (usually Red).
2. Connect the neutral fan wire (Blue wire) to the neutral household wire (usually Black).
3. Connect the two green and yellow fan ground wires, located on the downrod and mounting bracket, to the
household ground (Earth) wire.
Figure
9
this ceiling
fan requires a
grounded electrical
supply of 220-240V
ac, 50 Hz.
N
L1
L
Supply Cable
Grn/Yel Wire
(Earth)
Black Wire
(Neutral)
Red Wire
(Active)
Grn/Yel Wire
(Earth) from
Hanger Bracket
Grn/Yel Wire
(Earth) from Fan
Blue Wire
(Neutral)
Orange Wire
(Light Active)
Hanger Ball
Brown Wire
(Motor Active)
Terminal Block
(on Hanger Bracket)
