section 15 ~ warranty & returns
Myerson offers a one (1) year limited warranty against defects in
material and workmanship. If you would like to submit a product for
warranty return, please contact a myerson distributor or myerson.
Include only the defective product submitted for warranty replacement;
also include a letter describing in detail the problem, date of purchase
of the product, as well as a return address and contact name.
Myerson, LLC is not responsible for return shipment costs.
Myerson will refurbish or replace product found to be defective of
material or workmanship.
If after the one (1) year warranty you are experiencing a problem with
a product, please contact a myerson distributor or myerson.
Section 16 ~ technical data
•
Power Supply 120v model: 120VAC 50/60Hz 2.0A;
230v model: 230VAC 50/60Hz 2.0A
•
Max Melting Temp: 460°F (237°C)
•
Weight 12lbs (7.26 kg)
•
Mains Fuse rating 2A 250V 5x20mm Fast Acting
section 17 ~ troubleshooting
Symptom
Possible Cause
Solution
Unit does not turn on Fuse is blown.
Replace fuse with 2A 250V (5x20mm)
Power cord not fully inserted.
Check to ensure power cord is properly
inserted into the device.
Difficulty inserting
Thermoplastic material has leaked Unplug unit and allow unit to completely
injection sleeve into
into the heating chamber.
cool. Use a pointed instrument to remove
the unit
the material from heating chamber.
Discolored material
Injection sleeve was left in the unit Remove the injection upon injection
upon injection
after injection.
sleeve after expelling remaining material
from sleeve.
21
myerson HOTSHOTELITE MANUAL ENGLISH.indd 21
3/23/10 9:55:04 AM
