25581A043 05/07/14
3
on, the switch is defective and must be replaced.
Proceed to step 4. Then, with a new switch, repeat
step 3. If pump turns on, the problem is solved.
4. To replace switch, remove screw from tether
clamp. In assembling new switch, position cable
tie so the tether length is 2-7/8 – 3". Tighten cable
tie and cut off excess length. Mount tie to the
pump with a #10-24UNC x 1/2" long SST screw.
BASIN AND COVER REPAIR PARTS
25533D100 Basin 18 x 30 Regular Top for
Solid Covers or Split Covers
25536C100 Cover, Solid, Domed Plastic,
(4) Hole, 2" or 3" Vent
25536C010 Cover, Split, 2" Vent
25536C011 Cover, Split, 3" Vent
25960D000 IAPMO Basin, 18 x 30 Regular Top
for Solid Covers (16) Hole
25961C000 IAPMO Cover, Solid, Steel
(16) Hole, 2" Vent
25961C001 IAPMO Cover, Solid, Steel
(16) Hole, 3" Vent
25961C401 IAPMO Cover, Solid, Steel,
(16) Hole, 2" or 3" Vent
TYPICAL SEWAGE SYSTEM INSTALLATION