MTS53256
2
Rev. 7/30/21
WARNING INFORMATION
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY
THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY
INFORMATION.
READ THIS INSTRUCTION MANUAL CAREFULLY AND UNDERSTAND
ALL INFORMATION BEFORE OPERATING THIS TOOL.
• Read, study, understand & follow all instructions before using. It
is the responsibility of the owner to make sure all personnel read
this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient
location for all to see and read. If the manual or product labels
are lost or not legible, contact Myers Tool Supply for replacements.
If the operator is not fluent in English, the product and safety
instructions shall be read and discussed with the operator in
the operator's native language by the purchaser/owner or
his designee, making sure that the operator comprehends its
contents.
• Always operate, inspect and maintain this tool in accordance with
American National Standards Institute Safety Code for Portable Air
Tools (ANSI B186.1) and any other applicable safety codes and
regulations.
• For safety, top performance and maximum durability of parts,
operate this tool at 90 psig/6.3 bar max air pressure with 1/2"
diameter air supply hose.
• Always wear impact resistant eye & face protection (Users &
Bystanders) when operating or performing maintenance on this
tool .
• Always wear hearing protection when using this tool (Users &
Bystanders). High sound levels can cause permanent hearing
loss. Use hearing protection as recommended by your employer
or OSHA regulation.
• Keep the tool in efficient operating condition.
• Operators and maintenance personnel must be physically able to
handle bulk, weight and power of this tool.
• Keep tool out of reach of children.
• Air powered tools can vibrate during use. Extended exposure to
vibration, repetitive motions or uncomfortable positions during
use may be harmful to your hands and arms. Discontinue use of
tool if discomfort, tingling feeling or pain occurs. Seek medical
advice before resuming use.
• Compressed air can cause severe injury. Never direct air at
yourself or others. Always turn off the air supply, drain hose of
air pressure and detach tool from air supply before installing,
removing or adjusting any part or accessory on this tool, or before
performing any maintenance on this tool. Failure to do so could
result in injury.
• Whip hoses can cause serious injury. Always check for and replace
immediately any damaged, frayed or loose hoses and fittings.
• Do not operate a damaged or worn tool. Do no use quick-detach
couplings at tool. See instructions for correct set-up.
• Place the tool on the work before starting the tool. Do not point
or indulge in any horseplay with this tool.
• Slipping, tripping and/or falling while operating air tools can be a
major cause of serious injury or death. Be aware of excess hose
left on walking or work surface.
• Keep body working stance balanced and firm. Do not overreach
when operating this tool.
• Anticipate and be alert for sudden changes in motion during use
of any power tool.
• Do not carry tool by hose. Protect the hose from sharp objects and
heat.
• Note direction of rotation BEFORE operating this tool.
• Tool shaft may continue to rotate briefly after throttle is released.
Avoid direct contact with accessories during and after use. Gloves
will reduce the risk of cuts or burns.
• Keep away from rotating end of tool. Do not wear jewelry or
loose clothing. Secure long hair. Scalping can occur If hair is
not kept away from tool and accessories. Choking can occur if
neckwear is not kept away from tool and accessories.
• This tool is not insulated against electric shock.
• This tool must not be used in explosive atmospheres.
• Do not lubricate tools with flammable or volatile liquids such as
kerosene, diesel or jet fuel.
• Do not force tool beyond its rated capacity.
• Do not remove any labels. Replace any damaged
labels.
• Use only approved replacement parts and accessories
recommended by Myers Tire Supply.
• Servicing and repairs should only be made by an authorized
service center.
• Do not use (or modify) the tool for any other purpose than that
for which it was designed without consulting the manufacturer's
authorized representative.
•
Use only impact sockets and accessories on this tool. Do
not use hand and/or chrome sockets and accessories.
• Impact wrenches are not torque control devices. Fasteners with
specific torque requirements must be checked with suitable torque
measuring devices after installation with an impact wrench.
• Failure to heed these warnings may result in serious or fatal
personal injury and/or property damage.
WARNING:
This product can expose you to
chemicals including nickel which is known to
the State of California to cause cancer and
birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
