Mounting Your “Feather”
Before mounting your Feather, test your pickup by plugging it in and speaking into the ultra-light microphone
element on the end on the flexible Micro-Gooseneck. Your voice should be loud and clear. If not, check the
battery. Sometimes in transit, the battery becomes loose and all you need to do is reinstall it.
After you have sound tested your “Feather,” now it is time to mount it on your instrument. Experiment with
different locations for the sound you desire. Most people prefer to have the pickup element about ½” from
the sound hole or wherever the sound is produced. Once you have determined where to place your “Feather,”
the next step is to mount it.
The “Feather” is mounted by using the patented “Saddle-Clip” (provided). One side of the Saddle-Clip is used
to hold the Saddle-Clip to the instrument and the other side of it is to saddle/hold the “Feather” securely in
place. Adjust the Flexible Micro-Gooseneck to your desired position and you are ready to plug in. Your
“Feather” includes a belt clip. Mount the belt clip to the back of the preamp box with the “VHB” (very high
bond) two-sided tape included. Keep in mind which way you want the direction of the cable to determine the
best placement on the clip for you being a right-hand or a left-handed player.
Note: MYERSCO, the maker of Myers Pickups, is not responsible for any damage to your instrument. It is
highly recommended that you experiment first for the best placement to enhance sound and esthetics.
