Overview
Disconnected
The EV is not connected to
zappi
Connected
zappi
is waiting for the EV to respond; the EV is not ready to accept charge
Charging
The EV is charging, the test terminals are now live and the test can start
Connector Selection Switch
Allow to switch between the type 1 & the type 2 socket
Type 1 Socket
Use with a Type 1 plug
zappi
Type 2 Socket
Use with a Type 2 plug
zappi
Test Terminals
Connect the Electrical Tester to the respective terminals.
Note : L2 & L3 terminals are only available with a 3-phase
zappi
using the Type 2 socket
Selector Switch
Turn knob towards the desired mode
,
, or
Description
This
EVSE test box
can be used to test the
zappi
as well as other AC charge point/EVSE products.
The box signals to the
zappi
that an EV is connected and charging (the mode is selected with the selector
switch) .
The sockets
2
EVSE Test Box
installer manual
1
2
3
4
5
6
7
8
1
2
3
7
3
1
4
6
5
2
8
8