MyEnergy Domain Inc.
Operating Manual
Smart Thermostat
10
© Copyright MyEnergy Domain, Inc., 2014
Hardware Setup
Setup MyE Gateway
1.
Connect the MyE Gateway with the included AC/DC adapter to a 120 volt power source as shown in
Figure 6
.
2.
Connect the MyE Gateway with the included Ethernet cable to a home internet router as shown in
Figure 6.
Note:
1.
If your IP address is static (i.e. in an office
building), use a router to connect to the Ethernet
port in your office before connecting your MyE
Gateway to the router. The direct connection
between the MyE Gateway and the building’s
network terminal does not establish a
MyE HAN
(Home Area Network)
for you.
2.
See the
MyE Gateway Setup Manual
for details.
The red power LED and the yellow network LED
should display. Refer to
Figure 7
.
Install MyE Smart Thermostat
Read the included
MyE Smart Thermostat Installation Guide
for detailed instructions.
Home Internet Router
Power Adaptor
MyE Gateway
Ethernet Cable
Figure 6: Power Adaptor and Ethernet cable connections for the MyE Gateway.
Figure 7: MyE Gateway LED Indicator.
Power LED (Red)
Network LED (Yellow)
Status LED (Yellow)
