MYDATA MY500 JetPrinter, Service Manual

Page: 11 / 112

MYDATA
MY500 JetPrinter Safety
P-030-0014-EN – Service Manual
Rev. 0003 2008-06
1 - 1
1.
Safety
Before starting the machine, personnel involved in the machine operation,
maintenance or service must understand and follow these points:
•
This machine is designed to apply solder paste and glue onto printed wiring
boards. The machine must be used exclusively for this purpose and nothing
else.
•
The machine must be operated by qualified personnel only. Qualified
personnel should meet the following qualifications:
– Be above 18 years of age.
– Have normal depth perception, field of vision, reaction time, manual
dexterity, coordination, and no tendency to dizziness.
– Completed operators training.
•
All personnel involved in machine operation must understand the use of the
emergency stop buttons. See the
Emergency Stop Buttons section.
•
Anyone operating this machine must obey the warning signs.
•
At least one manual describing the warning signs of the particular machine
type must always be kept. For instance if the machine is upgraded to a later
version.
•
An emergency stop button must be pressed down when a solder paste
cassette is manually inserted or removed.
•
If there is a risk that any unauthorized personnel may alter the system
settings and thus the behavior of the machine, the logon facility for
individual access rights must be used.
•
Ensure that all covers and shields are intact, mounted, and closed while the
machine is in operation.
•
Do not disable or disengage any safety switch or sensor.
•
Do not configure or modify MYDATA machines or devices without
consulting MYDATA. The machines, devices or the interfaces between
them might become unsafe.
•
Do not use chemicals or other substances which may have any influence on
the operator or other personnel involved in the machine operation.