03
16
03
ASSEMBLY & MOUNTING
For the installation of the CLASSIC door frame clamp you should consider the follo-
wing basic conditions. Basically, the door clamp fits into any standard door frame.
IMPORTANT: The wall thickness should be at least 11.5 cm and may be a maximum
of 24 cm thick. In order for the door clamp to fit securely, the door frame should
have a horizontal contact surface of at least 1.5 cm.
No tools are required to install the CLASSIC door frame clamp.
MOUNTING THE DOOR FRAME CLAMP
Open the door frame clamp.
1.
Place in the door above the frame. Make sure that the door clamp is secure
and tight.
2.
Assemble baby hammock:
You already have a swinging hammock? Then you can use the snap hook to
hang it in the hole provided for this purpose on the tab of the door frame
clamp.
Make sure that the snap hook is closed. The extension chain (link chain) is
not needed when using the hammock in the door frame and can be stowed
away for later use.
IMPORTANT: Make sure that the baby hammock is always hung in
a free-turning position. To absorb torsional forces from the spring
the swivel should therefore always be attached above the spring.
3.
