No.QT33-04005F
-
１
-
1. Specification of driver
Model number
IMS20-210(L)
Power source
Single phase AC100-120V
±
10%, 50/60Hz
Power consumption
240 VA or less
Driving type
Bi-polar type
Driving current
Max. 2.0A (Total output current)
Correspondence
motor current
Uni-polar type :Max. 2.0A/phase
Bi-polar type :Max. 1.0A/phase
Step angle
Basic step (FULL) Half step (HALF)
Function
Auto-current-down, Auto-current-off, Driving current-off input
Timing output, Overheat output
Signal input
1 clk (PLUSE, CW/CCW), 2 clkCW, CCW), CO
Photo coupler input : input resistance 390ohm
Input signal voltage : L ; 0 to 0.5V, H ; +4 to +5V
Signal output
MONI, HEAT (Photo coupler, Open collector output)
External usage condition : DC24V or less, 10mA or less.
Applicable standard
EN60950
Dielectric
Strength
No abnormality detected after the application of 2.0kV(60Hz)
between the below terminals for one second.
Power input/Motor output terminal – PE terminal
Power input/Motor output terminal – Signal I/O terminal
Insulation
Resistance
100Mohm or higher with DC500V mega applied to the below
terminals in normal temperature and humidity.
Power input/Motor output terminal – PE terminal
Power input/Motor output terminal – Signal I/O terminal
Operating environment
temperature
0 to +40 degree, NO freezing
Operating environment
humidity
80% or less, No condensation
Storing environmental
temperature
-10 to +60 degree, No condensation
Storing humidity
80% or less, No condensation
Operating height
Less than 1,000m from sea level
Atmosphere
In the room without corrosive gas, inflammable gas and dust.
Without splashing water and oil
Weight
650 g
（
IMS20-210L:500 g
）
Accessories
User’s manual(This book)