No.QT33-04005F
-
７
-
4-2-7. Signal I/O connector (CN)
This is to be connected with driving pulse, current off signal and various monitor signals.
(Front panel side)
Connector combination 9 pin D-sub connector Socket type
Connector : OMRON, XM2D-0901 equivalent
Hood : OMRON, XM2S-0911 equivalent
（
M2.6
×
0.45
）
4-2-8. Motor connector terminals (MOTOR)
Connect color coded motor leads to these terminals.
4-2-9. Power source connector terminal (AC)
Connect single phase AC100V-120V, 50/60Hz
18AWG(0.75mm
2
) leads or larger are recommended.
4-2-10. Protective earth terminal (PE)
Connect with protective earth terminal of the device for safety without fail.
Use bigger leads for protective earth terminal connection than the leads used for power
source connector terminal.
Connector pin assignment
1
CW+
6
CO-
2
CW
−
7
MONI+
3
CCW+
8
HEAT+
4
CCW
−
9
COM
−
5
CO+
6
9
5
1