- 7 -
Machine Back View
How to add water (only purified / distilled water) ?
1. Put the funnel in the INLET hole
2. Take out the rubber from the middle hole (Overflow)
3.
Input water with pipe
4.
Input water until water go out from the overflow hole, that means the
machine already full of water
5.
Put the rubber back and take out the funnel
6. The OUTLET hole is for put out the water, when you want to change
water, put the funnel in this hole, then water will go out directly.
Notice:
When receive the machine, it must add the full water , then start the
machine .Every week must add some water , every month must run out off the water
and add fill again .Water source : pure water or distilled water.
when treating Cryolipolysis, the best temperature set : -5
℃
- 5
℃
.The handle
cannot treat above neck, navel and bone. During treating, please attention and ask
the customer's feeling . If patient fells too cold or uncomfortable, please button
"emergency switch" to stop the machine.