be
changed
according
to
client’s
tolerance, and
it’s advised to
start from the
lowest
level
when
just
operated
to
avoid
discomfort.
4. Attach the handle to
the fat part to be treated
with
anti-freezing
membrane covering it, and
change
the
suction
according
to
client’s
tolerance, then leave it
there for about 10 to 30
minutes.
5. Remove the device and
anti-freezing membrane,
and clean the treated part.
6. Do the same on the
other side.
7. Treatment done.
The treated parts may
have slight swelling and
redness, which is a
normal phenomenon.
Please
don't
worry
about it.
Course of Treatment Recommended:
Four treatments is a course. After one treatment, sling swelling and numbness will
disappear in about one week, and fat will decrease little by little in the second week,
and an evident effect can be seen in about two months. On average, the fat will reduce
22%, but it varies from person to person. After one course, the size decreases clearly,
the back becomes thin, and excessive fat starts to vanish. To have the treatment in
every two month in later stage to cement the effect.
Buttocks Fat Reducing & Sculpting: 30 Minutes/ Once a Month
Temperature
for
vacuum
freezing: -5 to
3
℃
Time: 10 to 30
Minutes
Suction: It can
be
changed
according
to
client’s
tolerance, and
it’s advised to
start from the
lowest
level
when
just
operated
to
avoid
Towel
+
Anti-freezing
Me
Vacuum
Freezing
1. Clean buttocks with
towel.
2. Choose the suitable
anti-freezing
membrane
according to the size of
the fat part, and then
apply it evenly to the
treated part.
3. Have the temperature,
time and suction set for
the corresponding handle.
4. Attach the handle to
the fat part to be treated
with
anti-freezing
membrane covering it,
and change the suction
according
to
client’s
tolerance, then leave it
there for about 10 to 30
minutes.
N/A
Caution:
The fat of buttocks will
be
contracted
evidently.
The treated parts may
have slight swelling and
redness, which is a
normal phenomenon.
Please
don't
worry
about it.
Summary of Contents for WL-7001C
Page 1: ...User Manual WL 7001C...