unexpected situations which may affect the curative effect.
(7) Please refrain from using the equipment aiming at the eyes, thyroid, parathyroid,
testicles, pregnant woman's abdomen, pacemaker, etc.
(8) Those suffering from an illness should use it with caution unless they get
permission from a doctor.
(9) Please turn the equipment's power switch off if no one uses it, and ensure the
main power is off after everything is settled. Thus the safety of the equipment can
be guaranteed.
(10) It's advised to stop taking other weight-loss medicines for 1 to 2 months before
treatment if you are taking them now. The course of treatment shall be extended
if you want to have it started immediately.
(11) Don't use the equipment with an empty stomach, and wait for at least one hour
after a full meal before starting the course for weight reduction.
(12) The equipment should contact the skin thoroughly to avoid uneven energy that
triggers discomfort when in use.
(13) Start from the lowest energy level and increase the level gradually after the client
gets used to it.
(14) When operating 40K, do not use it on the head and heart (chest and back).
(15) The device should contact the skin fully when in use. Otherwise, it may not be
attached to the skin.
(16) Don't set the suction of vacuum RF too high when treating the face to avoid the
appearance of redness.
(17) Product with high oil content must be applied, and the treated parts must be kept
moist.
(18) After the operation, clean the equipment with normal saline to ensure its
cleanliness and hygiene and extend its service life.
(19) Use the equipment and train the operators in strict accordance with the
instructions specified in the manual.
5. Common Malfunction & Troubleshooting Solutions
(1) The equipment can't be started, and the buttons in its back are not lighting up?
A. Make sure the power cord is plugged into a good power socket.
B. Check whether the fuse in its back is loose or burnt out.
(2) The equipment output is weakened or doesn't have RF output?
A. Please check whether the handpiece and the plug connecting to the equipment
body are closely linked.
B. Please check whether the handpiece uses the adaptive products for the treated
parts.
C. If the handpiece gets damaged, you can contact after-sales service.
(3) The equipment doesn't have suction, or the suction is weak?
A. Check whether the filter is inserted tightly. If not, it may cause no suction or slight
Summary of Contents for MS-5406
Page 1: ...User Manual MS 5406...